eia l w t e (min.) g (min.) dimensions: mm size code length width thickness termination insulation grm36 0402 1.0 0.05 0.5 0.05 0.5 0.05 0.15 ~ 0.3 0.4 grm39* 0603 1.6 0.1 0.8 0.1 0.8 0.1 0.2 ~ 0.5 0.5 0.6 0.1 grm40 0805 2.0 0.1 1.25 0.1 0.85 0.1 0.2 ~ 0.7 0.7 1.25 0.1 3.2 0.15 1.6 0.15 0.85 0.1 grm42-6 1206 1.15 0.1 0.3 ~ 0.8 1.5 3.2 0.2 1.6 0.2 1.6 0.2 1.15 0.1 grm42-2 1210 3.2 0.3 2.5 0.2 1.35 0.15 0.3 min. 1.0 1.8 0.2 2.5 0.2 grm43-2 1812 4.5 0.4 3.2 0.3 2.0 max. 0.3 min. 2.0 grm44-1 2220 5.7 0.4 5.0 0.4 2.0 max. 0.3 min. 2.0 cg01-j 7 surface mount monolithic chip capacitors cog and temperature compensating types grm36/39/40/42-6/42-2/43-2/44-1 series features miniature size no polarity nickel barrier termination standard ?highly resistant to metal migration uniform dimensions and configuration suitable for reflow soldering grm39, 40 and 42-6 suitable for wave soldering minimum series inductance tape and reel packaging bulk case packaging available for grm40 and smaller wide selection of capacitance values and voltages largest production capacity and volume in the world grm40 ??? cog 101 j 050 a d capacitor 3-digit code temperature capacitance value capacitance voltage marking packaging type and size appears as characteristics expressed in picofarads tolerance identified a = unmarked see below and necessary cog and identified by a *= standard by a following pages. to indicate coh three-digit number. 5pf: three-digit special p2h first two digits b = ?1pf number. thickness r2h represent significant *c = ?25pf requirements. s2h figures. last digit >5pf to 10pf: please consult t2h specifies the number b = ?1pf your local u2j of zeros to follow. c = ?25pf sales office sl for fractional values *d = ?5pf for details. below 10pf, the letter ? >10pf: is used as the decimal k = ?0% point and the last digit *j = ?% becomes significant. g = ?% f= 1% part numbering system chip dimensions chip termination diagrams reel diameter/ code tape material 7 paper tape d 7 plastic tape l 13 paper tape j 13 plastic tape k bulk b bulk cassette c 7 paper q 2mm pitch see pages 115 -118 for labeling and packaging information. all products on this page are available as standard through authorized murata electronics distributors. *bulk case packaging is l = 1.6 0.07, w, t = 0.8 0.07. ceramic dielectric inner electrode inner termination (ag or ag/pd or cu) nickel plated barrier layer tin plating* *size 0402 ?solder plated grm series nickel barrier layer (standard) ee g lw t surface mount monolithic chip capacitors
8 cg01-j temperature coefficient temperature range c0g = 0 30 ppm* ?5 to +125? c0h = 0 60 ppm ?5 to +125? p2h = n150 60 ppm ?5 to +85? r2h = n220 60 ppm ?5 to +85? s2h = n330 60 ppm ?5 to +85? t2h = n470 60 ppm ?5 to +85? u2j = n750 120 ppm ?5 to +85? sl = n1000 to p350 ?5 to +85? *tc tolerance for cog refer to eia-rs198e for other limitations test capacitance & q 1000pf 1mhz 100hz @ 1.0 .2 vrms (frequency & voltage): >1000pf 1khz 100hz @ 1.0 .2 vrms q limits 30pf: 400 + (20xc (pf)) >30pf: 1000 minimum insulation resistance 100,000 megohms or 1000 megohms ?mfd (i.r.) (whichever is less) with rated voltage applied for 2 minutes max with 50ma limiting current dielectric strength 250% of rated voltage for 5 seconds with series resistor limiting charging current to 50ma max.; (flash) 200% for 500v aging negligible general electrical mechanical environmental test test method post test limits terminal 0603 1.0 lbs. adhesion 0805 2.2 lbs. no evidence of termination peeling 1mm deflection (glass epoxy board) deflection no mechanical damage cap., df, ir meet initial limits solderability mil-std-202 contact factory for method 208f test limits test test method post test limits thermal mil-std-202, method 107, condition a appearance: no visual damage shock c: = ?.0% or ?.5pf (whichever is greater) (air to air) post thermal shock measurement shall be taken after 24 hours q: >30pf = 1,000 min., 30pf = 400 + [20 x c(pf)] stabilization. i.r.: = 100,000m min. or 1,000m f (whichever is less) appearance: no defects maintain the capacitor at 40 2? and 90 to 95% humidity for capacitance: within ?% or ?0.5pf (whichever is greater) humidity, 500 12 hours. remove and let sit for 24 2 hours at room q/d.f.: 30pf and over: q 350; 10pf to 30pf: q 275+5/2c steady state temperature, then measure. q/d.f.: 10pf and below: q 200?0c i.r.: 1,000m or 50m f (whichever is less) c: nominal capacitance (pf) appearance: no defects apply the rated voltage at 40 2? and 90 to 95% humidity for capacitance: within ?.5% or ?0.75pf (whichever is greater) humidity load 500 12 hours. remove and let sit for 24 2 hours at room q/d.f.: 30pf and over: q 200; temperature, then measure. the charge/discharge current is q/d.f.: 30pf and below: q 100?0/3c less than 50ma. . i.r.: 500m or 25m f (whichever is less) c: nominal capacitance (pf) apply 200% of rated voltage for 1000 12 hours at appearance: no defects maximum operating temperature; 150% for 500v. capacitance: ?% or ?3pf (whichever is greater) life test q: >30pf = 500 min., 30pf = 200 + [10 x c(pf)] upon completion of above test wait 24 hours prior i.r.: 1,000m or 50m f (whichever is less) to performing post testing. flash: 250% rated voltage mounting capacitor supporter unit: mm 45 45 deflection capacitance meter glass epoxy board 10 load r340 2n storage life chip component terminations should generally be protected from moisture. in addition, they should also be protected from materials containing chlorine, sulfur compounds or any harmful gases that could cause degradation of the solder. 1. all chip components, including tape and reel, should be kept in an area where the temperature is between 5? and 40? and where the humidity is 20% to 70%. 2. the chip components should be used within six months. 3. the solderability of the chip components should be rechecked in the event that they are not used in six months. 4. peel strength and shelf life of tape are guaranteed for 1 year when stored under afore said conditions. surface mount monolithic chip capacitors cog and temperature compensating types specification grm36/39/40/42-6/42-2/43-2/44-1 series
surface mount monolithic chip capacitors cog/coh type 25v/50v/100v/200v grm36/39/40/42-6 series cg01-j 9 thickness and packaging types/quantity type thickness: t bulk taping bulk case type thickness: t bulk taping bulk case (mm) (pcs./bag) (pcs./ 178mm reel) 1 (pcs./case) (mm) (pcs./bag) (pcs./ 178mm reel) 1 (pcs./case) grm36 : 0.5 0.05 1000 10000 50000 grm42-6 : 0.85 0.1 1000 4000 grm39 : 0.8 0.1 2 1000 4000 15000 : 1.15 0.1 1000 3000 : 0.6 0.1 1000 4000 10000 grm40 : 0.85 0.1 1000 4000 : 1.25 0.1 1000 3000 5000 1 330mm reel is available on request. 2 bulk case packaging is t = 0.8 0.07. type (eia code) grm36* (0402) grm39 (0603) grm40 (0805) grm42-6 (1206) char. cog coh cog coh cog coh cog coh volt. 50 25 50 100 200 25 50 100 200 25 50 100 200 25 cap. (pf) 0.5 0.75 1 1.5 2 3 4 5 6 7 8 9 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1000 1100 1200 1300 1500 1600 1800 2000 2200 2400 2700 3000 3300 3600 3900 4300 4700 5100 5600 6200 6800 7500 8200 9100 10000 11000 12000 13000 15000 16000 note: capacitance values = eia 24 step = 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, 91 *grm36 is suited to only reflow soldering. surface mount monolithic chip capacitors
surface mount monolithic chip capacitors cog type 50v/100v/200v grm42-2/43-2/44-1 series thickness and packaging types/quantity type thickness: t bulk taping (mm) (pcs./bag) (pcs./ 178mm reel)* grm42-2 : 1.35 0.15 1000 2000 grm43-2 : 2.0 max. 1000 1000 grm44-1 : 2.0 max. 1000 1000 type (eia code) grm42-2 (1210) grm43-2 (1812) grm44-1 (2220) char. cog cog cog volt. 50 100 200 50 100 200 50 100 200 cap. (pf) 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1000 1100 1200 1300 1500 1600 1800 2000 2200 2400 2700 3000 3300 3600 3900 4300 4700 5100 5600 6200 6800 7500 8200 9100 10000 11000 12000 13000 15000 16000 18000 20000 22000 24000 27000 30000 33000 36000 39000 43000 47000 * 330mm reel is available on request. note: capacitance values = eia 24 step = 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, 91 10 cg01-j
grm36/39 series cg01-j 11 thickness and packaging types/quantity type thickness: t bulk taping bulk case (mm) (pcs./bag) (pcs./ 178mm reel) 1 (pcs./case) grm36 : 0.5 0.05 1000 10000 50000 grm39 : 0.8 0.1 2 1000 4000 15000 type (eia code) grm36* (0402) grm39 (0603) char. sl sl p2h r2h s2h t2h u2j volt. 25 50 25 50 50 50 50 50 50 cap. (pf) 0.5 0.75 1 1.5 2 3 4 5 6 7 8 9 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1000 1100 1200 1300 1500 1600 1800 2000 2200 2400 2700 3000 3300 3600 3900 4300 4700 5100 5600 6200 6800 7500 8200 9100 10000 11000 12000 13000 15000 16000 1 330mm reel is available on request. 2 bulk case packaging is t = 0.8 0.07. surface mount monolithic chip capacitors temperature compensating type 25v/50v note: capacitance values = eia 24 step = 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, 91 *grm36 is suited to only reflow soldering. surface mount monolithic chip capacitors
surface mount monolithic chip capacitors temperature compensating type 25v/50v grm40/42-6 series 12 cg01-j type (eia code) grm40 (0805) grm42-6 (1206) char. sl p2h r2h s2h t2h u2j sl p2h r2h s2h t2h u2j volt. 25 50 50 50 50 50 50 25 50 50 50 50 50 50 cap. (pf) 0.5 0.75 1 1.5 2 3 4 5 6 7 8 9 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1000 1100 1200 1300 1500 1600 1800 2000 2200 2400 2700 3000 3300 3600 3900 4300 4700 5100 5600 6200 6800 7500 8200 9100 10000 11000 12000 13000 15000 16000 thickness and packaging types/quantity type thickness: t bulk taping bulk case type thickness: t bulk taping bulk case (mm) (pcs./bag) (pcs./ 178mm reel)* (pcs./case) (mm) (pcs./bag) (pcs./ 178mm reel)* (pcs./case) : 0.6 0.1 1000 4000 10000 grm42-6 : 0.85 0.1 1000 4000 grm40 : 0.85 0.1 1000 4000 : 1.15 0.1 1000 3000 : 1.25 0.1 1000 3000 5000 * 330mm reel is available on request. note: capacitance values = eia 24 step = 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, 91
|
